This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
NR 665.0312(2) (2)Except for prohibited wastes which remain subject to treatment standards in subch. D of ch. NR 668, ignitable wastes in containers may be landfilled without meeting the requirements of sub. (1), provided that the wastes are disposed of in such a way that they are protected from any material or conditions which may cause them to ignite. At a minimum, ignitable wastes shall be disposed of in non-leaking containers which are carefully handled and placed so as to avoid heat, sparks, rupture or any other condition that might cause ignition of the wastes; shall be covered daily with soil or other non-combustible material to minimize the potential for ignition of the wastes and may not be disposed of in cells that contain or will contain other wastes which may generate heat sufficient to cause ignition of the waste.
NR 665.0312 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 19-082: am. (1) (a) Register August 2020 No. 776, eff. 9-1-20.
NR 665.0313 NR 665.0313Special requirements for incompatible wastes. Incompatible wastes, or incompatible wastes and materials, (see ch. NR 665 Appendix V for examples) may not be placed in the same landfill cell, unless s. NR 665.0017 (2) is complied with.
NR 665.0313 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; correction made under s. 13.92 (4) (b) 7., Stats., Register March 2013 No. 687.
NR 665.0314 NR 665.0314Special requirements for bulk and containerized liquids.
NR 665.0314(1)(1)The placement of bulk or non-containerized liquid hazardous waste or hazardous waste containing free liquids (whether or not sorbents have been added) in any landfill is prohibited.
NR 665.0314(2) (2)Containers holding free liquids may not be placed in a landfill unless par. (a), (b), (c) or (d) applies:
NR 665.0314(2)(a) (a) All free-standing liquid is handled in one of the following ways:
NR 665.0314(2)(a)1. 1. It has been removed by decanting, or other methods.
NR 665.0314(2)(a)2. 2. It has been mixed with sorbent or solidified so that free-standing liquid is no longer observed.
NR 665.0314(2)(a)3. 3. It has been otherwise eliminated.
NR 665.0314(2)(b) (b) The container is very small, such as an ampule.
NR 665.0314(2)(c) (c) The container is designed to hold free liquids for use other than storage, such as a battery or capacitor.
NR 665.0314(2)(d) (d) The container is a lab pack as defined in s. NR 665.0316 and is disposed of in accordance with s. NR 665.0316.
NR 665.0314(3) (3)To demonstrate the absence or presence of free liquids in either a containerized or a bulk waste, the following test shall be used: Method 9095B (paint filter liquids test) as described in “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA SW-846, incorporated by reference in s. NR 660.11.
NR 665.0314(4) (4)The date for compliance with sub. (2) is July 1, 1985.
NR 665.0314(5) (5)Sorbents used to treat free liquids to be disposed of in landfills shall be nonbiodegradable. Nonbiodegradable sorbents are materials listed or described in par. (a); materials that pass one of the tests in par. (b) or materials that are determined by EPA to be nonbiodegradable through the 40 CFR part 260 petition process.
NR 665.0314(5)(a) (a) Nonbiodegradable sorbents are any of the following:
NR 665.0314(5)(a)1. 1. Inorganic minerals, other inorganic materials and elemental carbon (e.g., aluminosilicates, clays, smectites, Fuller's earth, bentonite, calcium bentonite, montmorillonite, calcined montmorillonite, kaolinite, micas (illite), vermiculites, zeolites; calcium carbonate (organic free limestone); oxides or hydroxides, alumina, lime, silica (sand), diatomaceous earth; perlite (volcanic glass); expanded volcanic rock; volcanic ash; cement kiln dust; fly ash; rice hull ash; activated charcoal or activated carbon).
NR 665.0314(5)(a)2. 2. High molecular weight synthetic polymers (e.g., polyethylene, high density polyethylene (HDPE), polypropylene, polystyrene, polyurethane, polyacrylate, polynorborene, polyisobutylene, ground synthetic rubber, cross-linked allylstyrene and tertiary butyl copolymers). This does not include polymers derived from biological material or polymers specifically designed to be degradable.
NR 665.0314(5)(a)3. 3. Mixtures of these nonbiodegradable materials.
NR 665.0314(5)(b) (b) The sorbent material may be determined to be nonbiodegradable using any of the following tests:
NR 665.0314(5)(b)1. 1. ASTM Method G21-70 (1984a)Standard Practice for Determining Resistance of Synthetic Polymer Materials to Fungi, incorporated by reference in s. NR 660.11.
NR 665.0314(5)(b)2. 2. ASTM Method G22-76 (1984b)Standard Practice for Determining Resistance of Plastics to Bacteria, incorporated by reference in s. NR 660.11.
NR 665.0314(5)(b)3. 3. OECD test 301B [CO2 Evolution (Modified Sturm Test)], incorporated by reference in s. NR 660.11.
NR 665.0314(6) (6)The placement of any liquid which is not a hazardous waste in a landfill is prohibited unless the owner or operator of the landfill demonstrates to the department, or the department determines, that both of the following apply:
NR 665.0314(6)(a) (a) The only reasonably available alternative to the placement in the landfill is placement in a landfill or unlined surface impoundment, whether or not operating under an operating license or interim license, which contains, or may reasonably be anticipated to contain, hazardous waste.
NR 665.0314(6)(b) (b) Placement in the owner or operator's landfill will not present a risk of contamination of any underground source of drinking water (as that term is defined in 40 CFR 144.3).
NR 665.0314 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 16-007: r. (1), renum. (2) to (7) to (1) to (6) and, as renumbered, am. (1), (3), (6) (intro.) Register July 2017 No. 739, eff. 8-1-17; correction in (4) as renumbered, made under s. 13.97 (4) (b) 7., Stats., Register July 2017 No. 739.
NR 665.0315 NR 665.0315Special requirements for containers. Unless they are very small, such as an ampule, containers shall be either of the following:
NR 665.0315(1) (1)At least 90 percent full when placed in the landfill.
NR 665.0315(2) (2)Crushed, shredded or similarly reduced in volume to the maximum practical extent before burial in the landfill.
NR 665.0315 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 665.0316 NR 665.0316Disposal of small containers of hazardous waste in overpacked drums (lab packs). Small containers of hazardous waste in overpacked drums (lab packs) may be placed in a landfill if all of the following requirements are met:
NR 665.0316(1) (1)Hazardous waste shall be packaged in non-leaking inside containers. The inside containers shall be of a design and constructed of a material that will not react dangerously with, be decomposed by or be ignited by the contained waste. Inside containers shall be tightly and securely sealed. The inside containers shall be of the size and type specified in the U.S. department of transportation (DOT) hazardous materials regulations (49 CFR parts 173, 178 and 179), if those regulations specify a particular inside container for the waste.
NR 665.0316(2) (2)The inside containers shall be overpacked in an open head DOT-specification metal shipping container (49 CFR parts 178 and 179) of no more than 416-liter (110 gallon) capacity and surrounded by, at a minimum, a sufficient quantity of sorbent material, determined to be nonbiodegradable in accordance with s. NR 665.0314 (5), to completely sorb all of the liquid contents of the inside containers. The metal outer container shall be full after it has been packed with inside containers and sorbent material.
NR 665.0316(3) (3)The sorbent material used may not be capable of reacting dangerously with, being decomposed by or being ignited by the contents of the inside containers, in accordance with s. NR 665.0017 (2).
NR 665.0316(4) (4)Incompatible wastes, as defined in s. NR 660.10, may not be placed in the same outside container.
NR 665.0316(5) (5)Reactive waste, other than cyanide- or sulfide-bearing waste as defined in s. NR 661.0023 (1) (e), shall be treated or rendered non-reactive prior to packaging in accordance with subs. (1) to (4). Cyanide- and sulfide-bearing reactive waste may be packaged in accordance with subs. (1) to (4) without first being treated or rendered non-reactive.
NR 665.0316(6) (6)The disposal is in compliance with the requirements of ch. NR 668. Persons who incinerate lab packs according to the requirements in s. NR 668.42 (3) (a) may use fiber drums in place of metal outer containers. The fiber drums shall meet the DOT specifications in 49 CFR 173.12 and be overpacked according to the requirements in sub. (2).
NR 665.0316 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 19-082: am. (2), (5) Register August 2020 No. 776, eff. 9-1-20.
subch. O of ch. NR 665 Subchapter O — Incinerators
NR 665.0340 NR 665.0340Applicability.
NR 665.0340(1)(1)This subchapter applies to owners and operators of hazardous waste incinerators (as defined in s. NR 660.10), except as s. NR 665.0001 provides otherwise.
NR 665.0340(2)(a)(a) Except as provided by pars. (b) and (c), this chapter no longer applies when an owner or operator demonstrates compliance with the maximum achievable control technology (MACT) requirements of 40 CFR part 63, subpart EEE, by conducting a comprehensive performance test and submitting proof of a postmarked notification of compliance to the department under 40 CFR 63.1207 (j) and 63.1210 (d) documenting compliance with 40 CFR part 63, subpart EEE.
NR 665.0340(2)(b) (b) Section NR 665.0351 and the applicable requirements of subchs. A to H, BB and CC continue to apply even where the owner or operator has demonstrated compliance with the MACT requirements of 40 CFR part 63, subpart EEE.
NR 665.0340(2)(c) (c) Section NR 665.0345 generally prohibiting burning of hazardous waste during startup and shutdown remains in effect if the owner or operator elects to comply with s. NR 670.235 (2) (a) 1. to minimize emissions of toxic compounds from startup and shutdown.
NR 665.0340(3) (3)Owners and operators of incinerators burning hazardous waste are exempt from this subchapter, except s. NR 665.0351, provided that the owner or operator has documented, in writing, that the waste would not reasonably be expected to contain any of the hazardous constituents in ch. NR 661 Appendix VIII, and has retained that documentation at the facility, if the waste to be burned is one of the following:
NR 665.0340(3)(a) (a) Listed as a hazardous waste in subch. D of ch. NR 661 solely because it is ignitable (hazard code I), corrosive (hazard code C) or both.
NR 665.0340(3)(b) (b) Listed as a hazardous waste in subch. D of ch. NR 661 solely because it is reactive (hazard code R) for characteristics other than those in s. NR 661.0023 (1) (d) and (e), and will not be burned when other hazardous wastes are present in the combustion zone.
NR 665.0340(3)(c) (c) A hazardous waste solely because it possesses the characteristic of ignitability, corrosivity or both, as determined by the tests for characteristics of hazardous wastes under subch. C of ch. NR 661.
NR 665.0340(3)(d) (d) A hazardous waste solely because it possesses any of the reactivity characteristics in s. NR 661.0023 (1) (a), (b), (c), (f), (g) or (h), and will not be burned when other hazardous wastes are present in the combustion zone.
NR 665.0340 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06; CR 16-007: am. (2) (a) Register July 2017 No. 739, eff. 8-1-17; CR 19-082: am. (2) (a), (3) (b), (d) Register August 2020 No. 776, eff. 9-1-20; correction in (3) (b) made under s. 35.17, Stats., Register August 2020 No. 776.
NR 665.0341 NR 665.0341Waste analysis. In addition to the waste analyses required by s. NR 665.0013, the owner or operator shall sufficiently analyze any waste which the owner or operator has not previously burned in the owner or operator's incinerator to enable the owner or operator to establish steady state (normal) operating conditions (including waste and auxiliary fuel feed and air flow) and to determine the type of pollutants which might be emitted. At a minimum, the analysis shall determine all of the following:
NR 665.0341(1) (1)Heating value of the waste.
NR 665.0341(2) (2)Halogen content and sulfur content in the waste.
NR 665.0341(3) (3)Concentrations in the waste of lead and mercury, unless the owner or operator has written, documented data that show that the elements are not present.
NR 665.0341 Note Note: As required by s. NR 665.0073, the owner or operator shall place the results from each waste analysis, or the documented information, in the operating record of the facility.
NR 665.0341 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 665.0345 NR 665.0345General operating requirements. During start-up and shut-down of an incinerator, the owner or operator may not feed hazardous waste unless the incinerator is at steady state (normal) conditions of operation, including steady state operating temperature and air flow.
NR 665.0345 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 665.0347 NR 665.0347Monitoring and inspections. The owner or operator shall conduct, as a minimum, all of the following monitoring and inspections when incinerating hazardous waste:
NR 665.0347(1) (1)Monitor existing instruments which relate to combustion and emission control at least every 15 minutes. Immediately make appropriate corrections to maintain steady state combustion conditions either automatically or by the operator. Instruments which relate to combustion and emission control would normally include those measuring waste feed, auxiliary fuel feed, air flow, incinerator temperature, scrubber flow, scrubber pH and relevant level controls.
NR 665.0347(2) (2)Inspect the complete incinerator and associated equipment (pumps, valves, conveyors, pipes, etc.) at least daily for leaks, spills and fugitive emissions, and check all emergency shutdown controls and system alarms to assure proper operation.
NR 665.0347 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 665.0351 NR 665.0351Closure. At closure, the owner or operator shall remove all hazardous waste and hazardous waste residues (including but not limited to ash, scrubber waters and scrubber sludges) from the incinerator.
NR 665.0351 Note Note: At closure, as throughout the operating period, unless the owner or operator can demonstrate, according to s. NR 661.0003 (4), that the residue removed from the owner or operator's incinerator is not hazardous waste, the owner or operator becomes a generator of hazardous waste and shall manage it according to all applicable requirements of chs. NR 662 to 666.
NR 665.0351 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 665.0352 NR 665.0352Interim licensed incinerators burning particular hazardous wastes.
NR 665.0352(1)(1)Owners or operators of incinerators subject to this subchapter may burn EPA hazardous wastes F020, F021, F022, F023, F026 or F027 if they receive an interim license or interim license modification from the department after the owner or operator demonstrates that they can meet the performance standards of subch. O of ch. NR 664 when they burn these wastes.
NR 665.0352(2) (2)The department shall use all of the following standards and procedures to determine whether to issue an interim license or interim license modification:
NR 665.0352(2)(a) (a) The owner or operator shall submit an application to the department containing applicable information in ss. NR 670.019 and 670.062 demonstrating that the incinerator can meet the performance standards in subch. O of ch. NR 664 when they burn these wastes.
NR 665.0352(2)(b) (b) The department shall issue a preliminary determination as to whether the incinerator can meet the performance standards in subch. O of ch. NR 664. The department shall provide notification of this preliminary determination by newspaper advertisement and radio broadcast in the jurisdiction where the incinerator is located. The department shall accept comments on the preliminary determination for 60 days. The department may also hold a public hearing upon request or at the department's discretion.
NR 665.0352(2)(c) (c) After the close of the public comment period, the department shall issue a decision whether or not to issue an interim license or interim license modification for the incinerator.
NR 665.0352 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
subch. P of ch. NR 665 Subchapter P — Thermal Treatment
NR 665.0370 NR 665.0370Other thermal treatment. This subchapter applies to owners or operators of facilities that thermally treat hazardous waste in devices other than enclosed devices using controlled flame combustion, except as s. NR 665.0001 provides otherwise. Thermal treatment in enclosed devices using controlled flame combustion is subject to the requirements of subch. O if the unit is an incinerator, and subch. H of ch. NR 666, if the unit is a boiler or an industrial furnace as defined in s. NR 660.10.
NR 665.0370 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 665.0373 NR 665.0373General operating requirements. Before adding hazardous waste, the owner or operator shall bring the thermal treatment process to steady state (normal) conditions of operation, including steady state operating temperature, using auxiliary fuel or other means, unless the process is a non-continuous (batch) thermal treatment process which requires a complete thermal cycle to treat a discrete quantity of hazardous waste.
NR 665.0373 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 665.0375 NR 665.0375Waste analysis. In addition to the waste analyses required by s. NR 665.0013, the owner or operator shall sufficiently analyze any waste which the owner or operator has not previously treated in the thermal process to enable the owner or operator to establish steady state (normal) or other appropriate (for a non-continuous process) operating conditions (including waste and auxiliary fuel feed) and to determine the type of pollutants which might be emitted. At a minimum, the analysis shall determine all of the following:
NR 665.0375(1) (1)Heating value of the waste.
NR 665.0375(2) (2)Halogen content and sulfur content in the waste.
NR 665.0375(3) (3)Concentrations in the waste of lead and mercury, unless the owner or operator has written, documented data that show that the element is not present.
NR 665.0375 Note Note: As required by s. NR 665.0073, the owner or operator shall place the results from each waste analysis, or the documented information, in the operating record of the facility.
NR 665.0375 History History: CR 05-032: cr. Register July 2006 No. 607, eff. 8-1-06.
NR 665.0377 NR 665.0377Monitoring and inspections. The owner or operator shall conduct, as a minimum, all of the following monitoring and inspections when thermally treating hazardous waste:
NR 665.0377(1) (1)Existing instruments which relate to temperature and emission control (if an emission control device is present) shall be monitored at least every 15 minutes. Appropriate corrections to maintain steady state or other appropriate thermal treatment conditions shall be made immediately either automatically or by the operator. Instruments which relate to temperature and emission control would normally include those measuring waste feed, auxiliary fuel feed, treatment process temperature and relevant process flow and level controls.
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.